BFI-P2/H3/E3 by Modbus RTU V2.0.0
Description
This library file includes a function block, documentation and handles the communication between X2/BoX2 Control and the BFI-E3, BFI-P2 or BFI-H3 frequency inverter using Modbus RTU.
Update information
BFI-P2/H3/E3 and X2control/Nexto/PIO by Modbus RTU V2.0.0
The library file contains the following functionality:
• Start and stop of motor
• Change Set frequency
• Normal-, fast- or coasting-stop
• Alarm Reset
• Constant monitoring of Drive Outputs, Alarms, Safety and Running Hours
• Read and Write of all parameters and data available
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serial number
• Possibility to control BFI from either PLC-program or an X2 HMI, Webvisu or WebIQ
The library file is also embedded in a PLC-program. This PLC-program adds additional functionality and by downloading it to the controller it is possible to run the BFI without any additional PLC code.
It also contains an iX-project to support the function block in BCS Tools. The iX-project contains one screen from which you can access all BFI in the network just by selecting the station number.
Version history
• Package V2.0.0 has new FB library file 2.0.0.0 for BCS Tools 3.62. This new package replaces the older packages.
• Package V1.0.3 is made for adapting autogenerating of all PLC-code in BCS Tools 3.51. (2024-01-11)
• Package V1.0.2 is an update version supporting more BFI inverter models. (2022-01-31)
• Package V1.0.1 is the first released version. (2021-04-27)
News in V2.0.0:
• Updated quick start manual.
• Supports all Beijer controllers (X2control/Nexto/PIO)
• FB Synchronized with Device Configuration in BCS Tools 3.62.
• Renaming of most variables
Developed and supported for:
• BCS Tools 3.62
• iX Developer 2.50/2.51
Tested hardware
• X2 control (marine / extreme) or BoX2 pro SC / motion
• All Nexto PLC:s (for example Nexto Xpress, BCS-NX3008
• All PIO PLC:s (for example GN-9372)
• BFI-P2 and BFI-H3 with at least firmware 2.40 and BFI-E3 with at least firmware 3.00
Package file:
• SER0015_V2.0.0_package.zip
The zip file contains a sample projects, a library file and a quick start guide:
• SER0015_V2.0.0.0_BFIModbusRTU.compiledlibrary
• SER0015_V2.0.0_XP300_BFI_ModbusRTU.projectarchieve (BCS Tools application)
• SER0015_V2.0.0_XP340Webvisu_BFI_ModbusRTU.projectarchieve (BCS Tools application)
• SER0015_V2.0.0_X2control_BFI_ModbusRTU.projectarchieve (BCS Tools application)
• SER0015_V2.0.0_GN9373_BFI_ModbusRTU.projectarchieve (BCS Tools application)
• iX_BFIAllbusesV105.zip (iX application)
• SER0015_QS_BFI_ModbusRTU_ V2.0.0-EN.pdf
Note! If you previously downloaded the package file from SmartStore, find the download link in submenu My account > My apps, when logged in!
Related documents
SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf
