BFI-P2/H3 and Nexto PLC by Ethernet/IP V1.0.0
Description
This library file includes a function block, documentation and handles the communication between Beijer controllers and BFI-P2 or BFI-H3 frequency inverter using Ethernet/IP.
Update information
The library file contains the following functionality:
• Start and stop of motor
• Change Set frequency
• Normal-, fast- or coasting-stop
• Alarm Reset
• Constant monitoring of Drive Outputs, Alarms, Safety and Running Hours
• Read and Write of all parameters and data available
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serial number
• Possibility to control from the PLC-program or the HMI
The library file is also embedded in a PLC-program. This PLC-program adds additional functionality and by downloading it to the controller it is possible to run the BFI without any additional PLC code.
It also contains an iX-project to support the function block in BCS Tools. The iX-project contains one screen from which you can access all BFI in the network just by selecting the station number.
Version history
• Package V1.0.0 is the first released version (2024-08-12)
Developed and supported for:
• BCS Tools 3.62
• iX Developer 2.50/2.51
Tested hardware
• Nexto Xpress, BCS-XP300
Package file:
• SER0040_V1.0.0_package.zip
The zip file contains a sample projects, a library file and a quick start guide:
• BFIEtherNetIPVer1.0.0.0.compiled-library
• EthernetIP BF-P2 BFI-H3 30-serie.eds (Configuration file)
• iX_BFIAllbusesV105.zip (iX application)
• SER0040_V1.0.0_XP300_BFI_EtherNetIP.projectarchieve (BCS Tools application)
• SER0040_QS_BFI_P2H3_ EtherNetIP_V1.0.0-EN.pdf
Note! If you previously downloaded the package file from SmartStore, find the download link in submenu My account > My apps, when logged in!
Related documents
SER0040_QS_BFIP2H3_EtherNetIP_V1.0.0-EN.pdf
